Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Discover how to change the engine oil on the Malaguti Grizzly 10 scooter by following the instructions below. First, locate the engine oil drain bolt, found at the bottom of the right crankcase; let the old oil drain into a container for about ten minutes. Once done, screw the plug back in and pour the new engine oil into the filler hole; fill it to the maximum level using the correct oil specifications (in this case, 80w90).

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Engine from a Malaguti Grizzly
How to Remove the Engine from a Malaguti Grizzly
Grizzly To remove the engine block from the frame of the Malaguti Grizzly, first disconnect the carburettor attached to it, along with the other cables, and …
How do you disassemble the engine of the Malaguti Grizzly?
How do you disassemble the engine of the Malaguti Grizzly?
Grizzly In order to disassemble the engine of the Malaguti Grizzly, you need to loosen the screws that fix it to the respective supports, and then also remov…
How to Dismantle the Engine of the Malaguti Grizzly?
How to Dismantle the Engine of the Malaguti Grizzly?
Grizzly To dismantle the engine of the Malaguti Grizzly, loosen the screws that secure the engine block within its housing: once the fixing bolts are removed…

How to Reset the Oil Light on a Honda PCX 160

In this mini guide, discover the steps to manually reset the oil light on the central display of your Honda PCX 160. First, turn on the ignition with the key and press both the 'Sel' and 'Set' buttons located below it simultaneously. When the time starts to flash, hold 'Sel' until the oil indicator flashes, then press the 'Set' button once. To complete the reset, hold 'Sel' again until the operation is finished.

Watch the video!


by ScegliAuto

More videos