Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plug on the Malaguti Grizzly

Model: Malaguti Grizzly
Part: Spark plugs

This video is currently unavailable

To replace the spark plug on the Malaguti Grizzly, access the components located under the seat by removing the side fairings. Behind these fairings, you will find the coil connected to the spark plug, which must be disconnected.

Using a socket spanner, you can then extract the old spark plug from its housing and replace it with a new spare part. After the old spark plug has been removed, insert the new one and connect it to the appropriate coil.

Finally, refit the previously removed side fairings.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Getting a Malaguti Grizzly That Has Been Idle to Start
Getting a Malaguti Grizzly That Has Been Idle to Start
Grizzly Remove the spark plug and put a bit of petrol (or mixture) into the cylinder. To do this, you will first need to remove the fairing. If it does not s…
How to Remove the Engine from a Malaguti Grizzly
How to Remove the Engine from a Malaguti Grizzly
Grizzly To remove the engine block from the frame of the Malaguti Grizzly, first disconnect the carburettor attached to it, along with the other cables, and …
How to Change the Engine Oil on a Malaguti Grizzly 10
How to Change the Engine Oil on a Malaguti Grizzly 10
Grizzly Discover how to change the engine oil on the Malaguti Grizzly 10 scooter by following the instructions below. First, locate the engine oil drain bolt…

How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard

Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge located right next to it using the appropriate tool, as shown in the video. At this point, install the new filter and unscrew the filler cap, pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos