Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Getting a Malaguti Grizzly That Has Been Idle to Start

Model: Malaguti Grizzly
Part: Engine

Video tutorial

Remove the spark plug and put a bit of petrol (or mixture) into the cylinder. To do this, you will first need to remove the fairing.

If it does not start, it may be due to fuel gumming in the tank, especially if you haven't used your Grizzly for a long time. Therefore, empty the tank and fill it with fresh petrol.

If this still doesn't work, remove the carburettor bowl and clean it. If it still won't start, check that the spark plug and coil are sparking: if not, you can sand the electrodes with fine sandpaper, otherwise, one of them needs to be replaced.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Malaguti Grizzly 10
How to Change the Engine Oil on a Malaguti Grizzly 10
Grizzly Discover how to change the engine oil on the Malaguti Grizzly 10 scooter by following the instructions below. First, locate the engine oil drain bolt…
How to Remove the Engine from a Malaguti Grizzly
How to Remove the Engine from a Malaguti Grizzly
Grizzly To remove the engine block from the frame of the Malaguti Grizzly, first disconnect the carburettor attached to it, along with the other cables, and …
How to Remove the Fork on a Malaguti Grizzly
How to Remove the Fork on a Malaguti Grizzly
Grizzly To remove the fork on a Malaguti Grizzly, position the bike on a stand and loosen the nut that secures the front wheel spindle. Once this is removed,…

How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard

Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge located right next to it using the appropriate tool, as shown in the video. At this point, install the new filter and unscrew the filler cap, pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos