Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine from a Malaguti Grizzly

Model: Malaguti Grizzly
Part: Engine

Video tutorial

To remove the engine block from the frame of the Malaguti Grizzly, first disconnect the carburettor attached to it, along with the other cables, and remove the spark plug from its housing. Once all these components have been removed, loosen the central nut of the stator to remove it and loosen the bolts securing the underlying plate.

By loosening the sprocket, you can loosen the chain and shift it so that the engine block can be extracted from its housing and replaced with a new one.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Malaguti Grizzly 10
How to Change the Engine Oil on a Malaguti Grizzly 10
Grizzly Discover how to change the engine oil on the Malaguti Grizzly 10 scooter by following the instructions below. First, locate the engine oil drain bolt…
How do you disassemble the engine of the Malaguti Grizzly?
How do you disassemble the engine of the Malaguti Grizzly?
Grizzly In order to disassemble the engine of the Malaguti Grizzly, you need to loosen the screws that fix it to the respective supports, and then also remov…
How to Dismantle the Engine of the Malaguti Grizzly?
How to Dismantle the Engine of the Malaguti Grizzly?
Grizzly To dismantle the engine of the Malaguti Grizzly, loosen the screws that secure the engine block within its housing: once the fixing bolts are removed…

How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard

Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge located right next to it using the appropriate tool, as shown in the video. At this point, install the new filter and unscrew the filler cap, pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos