Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, we will go through the steps to install the stator and flywheel, or rotor, on a Malaguti Phantom F12 scooter. First, clean the internal area of the casing thoroughly; then install the stator, correctly adjusting the engine's timing degrees; tighten the securing screws. At this point, you can install the flywheel onto the stator by inserting the conical seat of the key through the guide found on the flywheel hole; all that remains is to secure it with a socket wrench, as shown in the video!

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster from a Malaguti Phantom F12
How to Remove the Instrument Cluster from a Malaguti Phantom F12
Phantom F12 50 Before starting, position your Malaguti Phantom F12 on the central stand. Begin by unscrewing and removing the lower screws that secure the instrumen…
How to disassemble the variator cover of a Malaguti Phantom F12?
How to disassemble the variator cover of a Malaguti Phantom F12?
Phantom F12 50 Good morning, today's goal is to open the variator cover of our Malaguti Phantom F12. Let's start by placing the scooter on the central stand. Then, …
How to Repair the Rear Brake on a Malaguti Phantom F12
Phantom F12 50 To repair the rear brake on the Malaguti Phantom F12, you must first remove the exhaust and the rear wheel for easier access to the brake shoes. Next…

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos