Do it yourself
Frequently asked questions about cars and motorcycles
To reset the service light on a Malaguti Dune, press and hold the button located on the right side of the instrument panel, at the bottom. While holding it, turn the key in the ignition to switch on the instrument panel: this will display various screens until the screen is clear. At this point, you can release the button, checking that the service light has been reset; to confirm that the reset was successful, turn off and then turn on the instrument panel again.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Dune 125 In this video, you will find the main instructions for performing an engine oil change during the regular maintenance service on a Malaguti Dune 125,…
Dune 125 The spark plug of the Malaguti Dune 125 can be replaced by disconnecting the corresponding ignition coil located on the top of the engine cylinder: o…
Dune 125 You can replace the valves on a Malaguti Dune 125 by loosening the screws that secure the seat from its housing, allowing you to detach it and access…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos