Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Maruti Ciaz
    4. : Checks and maintenance

Maruti Ciaz - Checks and maintenance

Maruti Ciaz (2014-2023 / MK 1)
How do you set the clock on the Maruti Ciaz?
To adjust the clock on the Maruti Ciaz, turn on the instrument panel and then press and hold both buttons located on the sides of the instrument panel. While …read all…
Posted on 17 December 2023 by ScegliAuto
Maruti Ciaz (2014-2023 / MK 1)
How do you set the clock on the Maruti Ciaz?
To set the clock on the Maruti Ciaz, you need to turn on the dashboard and then hold down both buttons on either side of the dashboard. While holding down …read all…
Posted on 23 April 2023 by ScegliAuto
Maruti Ciaz (2014-2023 / MK 1)
How to carry out the coupon on Maruti Ciaz.
Lift the car with a lift or with a hydraulic jack and put stands for support and safety; place a container for the used oil under the vehicle and unscrew the …read all…
Posted on 9 June 2022 by ScegliAuto
Airbags (1) Car stereo (1) Battery (1) Spark plugs (1) Key (3) Checks and maintenance (3) Headlight (1) Tail light (1) Air filter (1) Cabin air filter (4) Hand brake (1) Light bulb (1) Headlight bulb (1) Rear light bulb (1) Interior lights ceiling light bulb (1) Engine oil (1) Front bumper (1) Brake pads (1) Gear Shift Knob (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos