|
Do it yourself
| |||
| ||||
How to Set the Clock in the Maruti Vitara Brezza?
Model: Maruti Vitara Brezza
MK 1
- Years:
2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
You can modify the clock in the Maruti Vitara Brezza by holding down the button located on the left side of the instrument cluster after it has been turned on. While continuing to hold the button, you will notice that the hours start to blink, and you can change them by repeatedly pressing the button on the right side of the cluster. Once the hours are changed, you can press and hold the left button again to modify the minutes. At the end, hold the left button to confirm the change.
Posted on 21 November 2026 by ScegliAuto
Related tutorials
Maruti Vitara Brezza
(2016-2023 /
MK 1)
To set the clock on the Maruti Vitara Brezza, turn the ignition key in the ignition switch to power on the instrument cluster. Once the cluster is on…
Maruti Vitara Brezza
(2016-2023 /
MK 1)
It will be possible to change the clock of the Maruti Vitara Brezza by first turning on the instrument panel, inserting the ignition key into the cor…
Maruti Vitara Brezza
(2016-2023 /
MK 1)
To adjust the clock on a Maruti Vitara Brezza, turn on the ignition by inserting the key. Once the instrument cluster is powered on, press and hold b…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Remove the Spare Wheel from the Citroen C4 Picasso
Follow these instructions to remove the spare wheel and replace it on the Citroen C4 Picasso. On this model, the spare wheel is located under the vehicle's floor; to lower it, simply unscrew the bolt to loosen the strap, then disconnect it from the spare wheel, as shown in the video. At this point, lift the vehicle and remove the wheel, securing the spare wheel or space-saver; tighten the bolts in a criss-cross pattern, finally placing the old wheel back under the vehicle's floor! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.053
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |