Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Speakers in the Maruti SX4

Model: Maruti Sx4 MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Speaker

Video tutorial

Today, you will see how to remove and replace the front and rear door speakers in the Maruti SX4 in this video tutorial. First, open the door and start by removing the door panel; to do this, unscrew all the screws located on it, disconnecting the handle cable and the electrical connector for the switch panel, as shown in the video.

At this point, unscrew the mounting screws for the speaker, disconnecting the electrical connector found on the back to remove it; replace it with the new one and reassemble everything!


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Maruti Sx4 (2007-2014 / MK 1) In today's tutorial video, you will learn how to remove and replace the fuel filter on a Maruti Sx4, following the instructions below. First, open th…
Maruti Sx4 (2007-2014 / MK 1) In this guide, see how to replace the cabin air filter of the Maruti Sx4. First, get inside the vehicle on the passenger side and open the glove comp…
Maruti Sx4 (2007-2014 / MK 1) Today, we will see in this video tutorial how to remove and replace the engine air filter of the Maruti SX4. First, open the hood of your car and sta…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos