Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter of the Maruti SX4

Model: Maruti Sx4 MK 1 - Years 2007-2014
Part: Air filter

Today, we will see in this video tutorial how to remove and replace the engine air filter of the Maruti SX4. First, open the hood of your car and start disconnecting the intake hose from the air filter box by unscrewing the clamp screw; then unscrew the screws of the filter box cover, which are located on the sides, using a Phillips screwdriver. At this point, remove the air filter and replace it with a new one of the correct type; insert it in the correct direction and reassemble everything, applying the reverse procedure!

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Cabin Air Filter of the Maruti Sx4
Replace the Cabin Air Filter of the Maruti Sx4
Maruti Sx4 (2007-2014 / MK 1) In this guide, see how to replace the cabin air filter of the Maruti Sx4. First, get inside the vehicle on the passenger side and open the glove comp…
Engine Oil and Oil Filter Replacement for Maruti Sx4
Engine Oil and Oil Filter Replacement for Maruti Sx4
Maruti Sx4 (2007-2014 / MK 1) Follow these steps to perform routine maintenance by replacing the engine oil and oil filter on the Maruti Sx4. First, lift the vehicle and start dra…
Replacing the Fuel Filter on a Maruti Sx4
Replacing the Fuel Filter on a Maruti Sx4
Maruti Sx4 (2007-2014 / MK 1) In today's tutorial video, you will learn how to remove and replace the fuel filter on a Maruti Sx4, following the instructions below. First, open th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos