Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Maruti Ritz

Model: Maruti Ritz MK 1 - Years 2009-2015
Part: Spark plugs

This guide shows you how to remove and replace the spark plugs on a Maruti Ritz, following the instructions below. First, open the hood of your car and start by removing the plastic engine cover; then, unscrew the mounting screws for the ignition coil using a socket wrench with an extension, and disconnect the connectors as shown in the video. At this point, use a socket wrench to unscrew and remove the spark plugs, replacing them with new ones (with the same thread pitch); then reassemble everything!

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Light Bulb in the Maruti Ritz?
How to Replace the Interior Light Bulb in the Maruti Ritz?
Maruti Ritz (2009-2015 / MK 1) To replace the interior light bulb in the Maruti Ritz, use an object to pry the dome light from its housing. Once removed, you can access the bulb in…
How to Understand the Fuse Diagrams in a Maruti Ritz
Maruti Ritz (2009-2015 / MK 1) This video tutorial shows the diagrams related to the fuse assignments in a Maruti Ritz. The first diagram pertains to the fuse box located in the en…
How to Replace the Timing Chain on a Maruti Ritz?
How to Replace the Timing Chain on a Maruti Ritz?
Maruti Ritz (2009-2015 / MK 1) To replace the timing chain on a Maruti Ritz, open the hood to detach the cover from the top of the engine block. Once this cover is removed, you wil…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos