Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Maruti Eeco

Model: Maruti Eeco MK 1 - Years 2010-2024
Part: Spark plugs

To replace the spark plugs on this vehicle model, follow the instructions and information provided below for a proper replacement. The engine is located under the front passenger seat. To access it, lift and flip the seat cushion. To make the job easier, remove the battery first. Then, locate the coil connectors and use a socket wrench to remove the bolts securing them. Once the 4 coils are removed, use the socket wrench to unscrew the spark plugs, then replace them with new ones and reassemble all components in reverse order.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Suspension on a Maruti Eeco
How to Replace the Suspension on a Maruti Eeco
Maruti Eeco (2010-2024 / MK 1) To replace the suspension on a Maruti Eeco, lift the vehicle with a jack or lift so that the wheels are not in contact with the ground. This will all…
How to Replace the Sliding Door Handle on a Maruti Eeco?
How to Replace the Sliding Door Handle on a Maruti Eeco?
Maruti Eeco (2010-2024 / MK 1) To replace the sliding door handle on a Maruti Eeco, unscrew the screws that secure the inner panel of the door so that it can be removed, giving acc…
How to Replace the Fuel Filter in a Maruti Eeco?
How to Replace the Fuel Filter in a Maruti Eeco?
Maruti Eeco (2010-2024 / MK 1) As shown in this tutorial, replacing the fuel filter in a Maruti Eeco is a very simple and quick operation. First, wait for the engine to be complete…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos