Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Eeco
    4. : How to change the battery on the Maruti Eeco

Maruti Eeco - Video tutorial

Model: Maruti Eeco MK 1 - Years 2010-2023
Part: Battery
Operation: How to change the battery on the Maruti Eeco

If we want to try our hand at replacing the battery on this car model in do-it-yourself mode, we will find the instructions in the video tutorial and the various steps to be carried out in this description. On this car model, the battery is located under the passenger seat where the engine is also housed. Then proceed to first disconnect the negative terminal and then the positive one and then unscrew the fixing nuts of the upper plate. Then extract the battery from its housing and position the new one and proceed to connect the positive pole first and then the negative one and reattach the upper fixing plate.


Posted on 14 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Maruti Eeco 2010-2023 - Where is the battery located in the Maruti Eeco? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos