|
Do it yourself
| |||
| ||||
How to Replace the Remote Battery of the Maruti Suzuki SX4
Model: Maruti Sx4
MK 1
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
This guide shows how to replace the remote battery of the Maruti Suzuki SX4. First, remove the screw located on the back of the remote using a small Phillips screwdriver. At this point, you can remove the back cover of the remote and, using a small flathead screwdriver or a pick, take out the electronic board casing from the outer shell. Use the small notch on the side of the casing to pry apart the two halves with the screwdriver. Remove the battery and install a new CR2025 model. Reassemble everything and check for proper operation.
Updated on 14 July 2026 by ScegliAuto
Related tutorials
Maruti Sx4
(2007-2014 /
MK 1)
Follow these steps to perform routine maintenance by replacing the engine oil and oil filter on the Maruti Sx4. First, lift the vehicle and start dra…
Maruti Sx4
(2007-2014 /
MK 1)
In today's tutorial video, you will learn how to remove and replace the fuel filter on a Maruti Sx4, following the instructions below. First, open th…
Maruti Sx4
(2007-2014 /
MK 1)
Today, we will see in this video tutorial how to remove and replace the engine air filter of the Maruti SX4. First, open the hood of your car and sta…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.082
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |