Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Maruti Sx4

Model: Maruti Sx4 MK 1 - Years 2007-2014
Part: Battery

To replace the battery yourself on this vehicle model, follow the steps below. Open the hood and locate the battery on the left side. Use a wrench to remove the support nuts from the mounting plate above. Then, connect the negative terminal first, followed by the positive terminal. Remove the battery from its housing and replace it with the new one, reconnecting the positive terminal first and then the negative terminal. Finally, reattach the support nuts for the plate.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Maruti Suzuki SX4
How to Replace the Remote Battery of the Maruti Suzuki SX4
Maruti Sx4 (2007-2014 / MK 1) This guide shows how to replace the remote battery of the Maruti Suzuki SX4. First, remove the screw located on the back of the remote using a small …
Replacing the Air Filter of the Maruti SX4
Replacing the Air Filter of the Maruti SX4
Maruti Sx4 (2007-2014 / MK 1) Today, we will see in this video tutorial how to remove and replace the engine air filter of the Maruti SX4. First, open the hood of your car and sta…
Engine Oil and Oil Filter Replacement for Maruti Sx4
Engine Oil and Oil Filter Replacement for Maruti Sx4
Maruti Sx4 (2007-2014 / MK 1) Follow these steps to perform routine maintenance by replacing the engine oil and oil filter on the Maruti Sx4. First, lift the vehicle and start dra…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos