Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the pollen filter of the Maxus G10

Model: Maxus G10 MK 1 - Years 2014-2024
Part: Cabin air filter

Let's find out today how to remove and replace the cabin air filter or the pollen filter of the Maxus G10. First of all we get on board the car, on the front passenger side, and start by disassembling and removing the glovebox, unhooking the two side rods; after which we remove the cover of the pollen filter box to extract it, as shown in the video. At this point we replace the passenger compartment air filter with the new one, inserting it in the correct direction (usually indicated with arrows printed on the filter); finally install the glove box!

Posted on 21 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel filter in the Maxus G10 van?
How to replace the fuel filter in the Maxus G10 van?
Maxus G10 (2014-2024 / MK 1) In this tutorial we can see how to replace the diesel filter in the Maxus G10 van, an extremely simple and fast operation. First of all, make sure th…
How is the service done on the Maxus G10?
How is the service done on the Maxus G10?
Maxus G10 (2014-2024 / MK 1) To be able to service the Maxus G10 you have to go and lift the car, so that you can unscrew the oil drain plug. All the oil that escapes must be col…
Where is the fuse box located in the Maxus G10?
Where is the fuse box located in the Maxus G10?
Maxus G10 (2014-2024 / MK 1) If you are curious to know the exact location of the fuse box in your Maxus G10, all you need to do is read the instructions in the following mini gu…

Other guides you may be interested in

How to Remove the Steering Wheel Airbag on a Dodge Journey

How to remove the steering wheel airbag on a Dodge Journey? Follow these steps. Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Remove the inspection caps from the back of the steering wheel, then unscrew the airbag retaining bolts with a socket wrench. Once the driver’s airbag is released, disconnect the power connectors and remove the airbag from the steering wheel. For reinstallation: connect the power connectors, then press the airbag back onto the steering wheel while simultaneously tightening the rear bolts.

Watch the video!


by ScegliAuto

More videos