Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight assembly on the Maxus D60

Model: Maxus Maxus Various
Part: Headlight

In order to remove and replace the front light unit on the car it is necessary to proceed as follows: open the bonnet, to remove the light unit you must first remove the front cover and, to do this, unscrew the three screws on the upper frame. Then identify the screws that support the lighthouse which are located one in the upper part and two screws placed on the internal side between the lighthouse and the mask. At that point it will be possible to extract the optical unit after having unhooked the three connectors and electrical connection cables placed behind it.

Posted on 4 November 2022 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Maxus LDV V80
Where is the fuse box of the Maxus LDV V80
Maxus Maxus Various Knowing the exact position in which the fuse box of your car is located is very important as it allows you to intervene in a safe and timely manner o…
How is the battery of the Maxus Deliver 9 key replaced?
How is the battery of the Maxus Deliver 9 key replaced?
Maxus Maxus Various The battery of the key/remote control of any vehicle, including the one mentioned, naturally discharges over time, thus requiring replacement. Given …
How to adjust the time in the Maxus Deliver 9 van?
How to adjust the time in the Maxus Deliver 9 van?
Maxus Maxus Various In this tutorial we can see how to adjust the time in the Maxus Deliver 9 van, an extremely simple and fast operation, to be carried out for example …

Other guides you may be interested in

How to Dismantle the Heating Radiator on a Mini Cooper

Let’s see how to dismantle the heating radiator on a Mini Cooper. First, remove the plastic cover of the centre tunnel (located under the centre tunnel on the left). Unscrew the securing screws with a screwdriver, and remove the black plastic cover that hides the heating radiator. Once all the described operations are completed, move to the engine bay: remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips if present) of the radiator that goes into the cabin, allowing the fluid to drain. Disconnect the radiator from the pipes inside the cabin. Work in reverse for all the assembly steps.

Watch the video!


by ScegliAuto

More videos