Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Manually Adjust the Headlight Height on the Maxus T60

Model: Maxus T60 MK 1 - Years 2016-2024
Part: Headlight

If you need to change the height of the headlights on this vehicle, you will find instructions on how to proceed in the description below, and you can also refer to the tutorial video. To perform this operation, you need a Phillips screwdriver. First, open the hood and locate the screw and adjustment ring for the headlight height behind the headlight assembly. Then, use the screwdriver to adjust the height of the headlight as desired, being careful not to exceed the height to avoid blinding oncoming drivers.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Headlight Height on a Maxus T60
How to Adjust the Headlight Height on a Maxus T60
Maxus T60 (2016-2024 / MK 1) If you need to adjust the height of the headlights on the vehicle, you can follow the instructions below and refer to this video. First, open the hoo…
Guide to Replacing the Timing Belt on the MG T60 - Maxus T60
Guide to Replacing the Timing Belt on the MG T60 - Maxus T60
Maxus T60 (2016-2024 / MK 1) In this guide, we will look at the procedure to remove and replace the timing belt on the Maxus T60 and MG T60. First, open the hood of your car and …
How to Set the Brightness of the Maxus T60 Display
How to Set the Brightness of the Maxus T60 Display
Maxus T60 (2016-2024 / MK 1) In this brief and simple guide, set the brightness of the multimedia system display of the Maxus T60 by following the instructions below. First, get …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos