Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maxus
    3. :
  3. T60
    4. : How to reset the service in the Maxus T60?

Maxus T60 - Video tutorial

Model: Maxus T60 MK 1 - Years 2016-2023
Part: Checks and maintenance
Operation: How to reset the service in the Maxus T60?

In this tutorial we can see how to reset the service in the Maxus T60. Before carrying out this simple operation, we will obviously have to complete all the required maintenance work. We start by inserting the key and turning on the instrument panel, after which we remove any signal from the display and press the "SET" button, located at the end of the light control lever, 5 consecutive times. Once this is done we will be able to view the interval reset correctly at 10,000 km. If this does not happen, make sure to make the 5 key presses very quickly.


Posted on 11 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos