Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil and filter in the Maxus G10?

Model: Maxus G10 MK 1 - Years 2014-2024
Part: Engine oil

Let's remove the lower engine protection panel using a 10mm wrench and a Phillips screwdriver. Now let's take a 13mm wrench and unscrew the nut that acts as a plug for the oil pan: this way the used motor oil can flow out of the car and we can collect it in a container for disposal. When it stops flowing, we close the nut. Locate the position of the oil filter, remove it and replace it with a new one, also changing the gasket. Now all we have to do is move to the front hood and pour the new motor oil into the appropriate opening.

Posted on 4 April 2023 by ScegliAuto

Video tutorial

Related tutorials

How is the service done on the Maxus G10?
How is the service done on the Maxus G10?
Maxus G10 (2014-2024 / MK 1) To be able to service the Maxus G10 you have to go and lift the car, so that you can unscrew the oil drain plug. All the oil that escapes must be col…
How to replace the fuel filter in the Maxus G10 van?
How to replace the fuel filter in the Maxus G10 van?
Maxus G10 (2014-2024 / MK 1) In this tutorial we can see how to replace the diesel filter in the Maxus G10 van, an extremely simple and fast operation. First of all, make sure th…
How to change the style of the Maxus G10 watch
How to change the style of the Maxus G10 watch
Maxus G10 (2014-2024 / MK 1) Let's see in this short and simple guide how to change the style of the watch that we find on the central display of the instrumentation of the Maxus…

Other guides you may be interested in

How to Remove the Interior Handle on a Volkswagen Golf

In this video, see how to remove and replace the interior handle of a Volkswagen Golf. This operation is straightforward if you follow the correct steps. First, use a screwdriver to unclip the metal clips of the levers, then take the handle and pull it out from the support. Once the first support is removed, proceed to remove the other support in the same manner. Complete the disassembly of the part: install the new handle with all the supporting brackets as removed previously. Finally, test the correct operation of the handle.

Watch the video!


by ScegliAuto

More videos