Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx7
    4. : Warning light – error code

Mazda Cx7 - Warning light – error code

Warning Light – Error Code Mazda Cx7 (2006-2012 / mk 1)

Mazda Cx7 (2006-2012 / MK 1)
Resetting the TCS System on the Mazda CX7
In this video, we see that if there is a power interruption on the Mazda CX7, for example, following a battery replacement, the TCS system light may come on …Read all…
Posted on 17 September 2026 by ScegliAuto
Mazda Cx7 (2006-2012 / MK 1)
How to Reset the DPF Warning Light on the Mazda CX7?
To reset the DPF warning light on the Mazda CX7, turn off the ignition and connect a wire from the upper terminal of the connector to a grounding point on the …Read all…
Posted on 11 June 2026 by ScegliAuto
Car stereo (3) Battery (2) Spark plugs (1) Body (1) Key (3) Checks and maintenance (2) Diesel fuel filter (1) Accessory kit (1) Light bulb (2) Headlight bulb (2) Tail light bulb (1) License plate light (1) Power window motor (1) Engine oil (1) Fuse box (1) Oxygen sensor (1) Warning light – error code (2) Turbocharger (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos