Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx7
    4. : Key

Mazda Cx7 - Key

Mazda Cx7 (2006-2012 / MK 1)
How to replace the battery of the Mazda CX-7 remote control?
Replacing the battery of the Mazda CX-7 remote control, as we can see in this tutorial, is a very simple and quick operation. To do this, we will need a …read all…
Posted on 3 May 2023 by ScegliAuto
Mazda Cx7 (2006-2012 / MK 1)
How to replace the battery of the Mazda Cx7 key
How do we replace the battery of the Mazda Cx7 key remote control? We take our remote control and press the release button of the metal key. Once the metal key …read all…
Posted on 14 November 2023 by ScegliAuto
Mazda Cx7 (2006-2012 / MK 1)
How to change the remote control battery of a Mazda Cx7
How to change the remote control battery of a Mazda Cx7. We take our remote control and press the release button of the metal key. Once the metal key has come …read all…
Posted on 14 October 2023 by ScegliAuto
Car stereo (3) Battery (1) Spark plugs (1) Bodywork (1) Key (3) Checks and maintenance (3) Diesel filter (1) Accessory Kit (1) Light bulb (2) Headlight bulb (2) Rear light bulb (1) License plate light (1) Window motor (1) Engine oil (1) Lambda sensor (1) Turbine (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos