Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx7
    4. : Car stereo

Mazda Cx7 - Car stereo

Mazda Cx7 (2006-2012 / MK 1)
Car radio disassembly instructions
First move the gear lever backwards to facilitate removal. Using a small plastic lever, unhook the frame around the car radio and the air conditioning …read all…
Posted on 12 July 2023 by ScegliAuto
Mazda Cx7 (2006-2012 / MK 1)
Disassembly of the car radio to install the iPod iPhone interface
With a small fixed screwdriver, unclip the frame around the two knobs of the car radio and the one with the aluminum edge of the center console which also …read all…
Posted on 29 June 2023 by ScegliAuto
Mazda Cx7 (2006-2012 / MK 1)
Disassembly of the car radio and installation of the satellite navigator
Begin to remove the plastic moldings on the sides of the tunnel by gently pulling them using just your hands. Remove the screws of the plastic frame and then …read all…
Posted on 25 June 2023 by ScegliAuto
Car stereo (3) Battery (1) Spark plugs (1) Bodywork (1) Key (3) Checks and maintenance (3) Diesel filter (1) Accessory Kit (1) Light bulb (2) Headlight bulb (2) Rear light bulb (1) License plate light (1) Window motor (1) Engine oil (1) Lambda sensor (1) Turbine (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos