Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Fob Battery of a Mazda CX-7

Model: Mazda Cx7 MK 1 - Years 2006-2012
Part: Key

How to change the key fob battery of a Mazda CX-7. Take your key fob and press the metal key release button. Once the metal key is out, use a screwdriver to pry between the two covers of the key (in the space where the metal key fits). Pry until the two covers separate, then extract the worn battery with a small screwdriver, take a new one of the same size and voltage. Reassemble the cover on your key fob by pressing on the key case until you hear it click into place, joining the two covers. Check the proper functioning of the key fob by pressing the buttons.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Mazda CX-7 Key Fob
How to Replace the Battery in a Mazda CX-7 Key Fob
Mazda Cx7 (2006-2012 / MK 1) How do you replace the battery in a Mazda CX-7 key fob? Take your key fob and press the metal key release button. Once the metal key pops out, use a …
How to Replace the Diesel Filter on a Mazda CX7
How to Replace the Diesel Filter on a Mazda CX7
Mazda Cx7 (2006-2012 / MK 1) Before you can start, open the front bonnet of your Mazda CX7. Begin by unscrewing the screws that secure the support brackets of the diesel filter. …
Replacing the Battery on a Mazda CX-7
Replacing the Battery on a Mazda CX-7
Mazda Cx7 (2006-2012 / MK 1) How to maintain your car? This guide explains how to replace the battery on a Mazda CX-7. Lift the bonnet by releasing the locking lever with your fi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos