Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Rx 8
    4. : Clutch

Mazda Rx 8 - Clutch

Mazda Rx 8 (2003-2012 / MK 1)
Replacing the clutch and flywheel
Replacing these elements is a job that requires experience and good equipment. First of all you have to remove the carter on the bottom of the car to be able …read all…
Posted on 27 July 2023 by ScegliAuto
Car stereo (1) Spark plugs (2) Differential (1) Brake discs (1) Headlight (1) Tail light (1) Air filter (4) Cabin air filter (3) Clutch (1) Accessory Kit (4) Headlight bulb (2) Interior lights ceiling light bulb (1) Gear oil (1) Engine oil (2) Front bumper (1) Brake pads (1) Radiator (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos