Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Rx 8
    4. : Air filter

Mazda Rx 8 - Air filter

Mazda Rx 8 (2003-2012 / MK 1)
How to replace the air filter on a Mazda Rx8.
Do we intend to replace the air filter ourselves on this car model? In the description below, we will find everything that can be useful and important for the …read all…
Posted on 4 June 2023 by ScegliAuto
Mazda Rx 8 (2003-2012 / MK 1)
How do you replace the air filter on a Mazda RX-8?
To replace the air filter of the Mazda RX-8, you need to open the hood to access the components inside the engine compartment. It will be necessary to unscrew …read all…
Posted on 26 April 2023 by ScegliAuto
Mazda Rx 8 (2003-2012 / MK 1)
Engine air filter replacement
Open the bonnet and locate the filter container located in the air box to the right of the engine. Release the springs applied to the lid by lifting them …read all…
Posted on 18 July 2023 by ScegliAuto
Mazda Rx 8 (2003-2012 / MK 1)
Engine air filter replacement
Open the engine hood: the filter is located at the front of the engine. Unhook the bayonet locks of the filter container and push it backwards in order to …read all…
Posted on 18 July 2023 by ScegliAuto
Car stereo (1) Spark plugs (2) Differential (1) Brake discs (1) Headlight (1) Tail light (1) Air filter (4) Cabin air filter (3) Clutch (1) Accessory Kit (4) Headlight bulb (2) Interior lights ceiling light bulb (1) Gear oil (1) Engine oil (2) Front bumper (1) Brake pads (1) Radiator (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos