Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Mazda RX-8

Model: Mazda Rx 8 MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Air filter

Video tutorial

Are you planning to replace the air filter on this car model? The description below provides everything you need for the replacement, and you can also check the images in the video. The box containing the filter is located at the front of the engine bay behind the radiator.

First, loosen and remove the hose clip from the rear air duct. Then, unclip the steel clips securing the cover and remove it. Underneath, you will find the filter, which you can extract and replace with the new one, then reattach the cover clips and secure the air duct.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a 2006 Mazda RX8
How to Replace the Cabin Air Filter on a 2006 Mazda RX8
Mazda Rx 8 (2003-2012 / MK 1) If you want to independently replace the cabin air filter in your 2006 Mazda RX8, simply follow all the steps described in this guide. Before startin…
How to Replace the Differential Oil in a Mazda Rx8
How to Replace the Differential Oil in a Mazda Rx8
Mazda Rx 8 (2003-2012 / MK 1) To replace the differential oil in a Mazda Rx8, start by removing the differential oil drain plug located behind the exhaust using a 24 mm socket. Al…
How to Replace the Air Filter on a Mazda RX-8?
How to Replace the Air Filter on a Mazda RX-8?
Mazda Rx 8 (2003-2012 / MK 1) To replace the air filter on a Mazda RX-8, open the bonnet to access the components inside the engine bay. You will need to remove the screws securin…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos