Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cooling Radiator on the Mazda 5 2.3L

Model: Mazda 5 MK 1 - Years 2005-2015
Part: Radiator

Today, you will see the main instructions on how to remove and replace the engine cooling radiator on the Mazda 5 2.3L. First, lift the vehicle and begin by removing the lower engine cover, disconnecting the coolant pipe (draining the coolant into a container). From the engine bay, remove the air filter box, also disconnecting the throttle body, as shown in the video. At this point, undo the upper screws of the radiator and fan, disconnecting the electrical connector; disconnect the pipes to extract the radiator and replace it with the new one.

Posted on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Mazda 5
How to Remove the Radio from a Mazda 5
Mazda 5 (2005-2015 / MK 1) Before you can start, sit in the driver's seat of your Mazda 5. Begin by unscrewing and removing the gear knob, then unclip and remove all the covers…
Where is the fuse box located in the Mazda 5?
Where is the fuse box located in the Mazda 5?
Mazda 5 (2005-2015 / MK 1) To find the box that contains all the fuses of your Mazda 5 in just a few seconds, you need to carefully read the following guide and apply the descr…
Replacing the Rear Light Bulbs on a Mazda 5
Replacing the Rear Light Bulbs on a Mazda 5
Mazda 5 (2005-2015 / MK 1) Let’s briefly go through the steps to remove and replace the rear light bulbs on a Mazda 5. First, open the tailgate and start unscrewing the side sc…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos