Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the key for the Mazda 5?

Model: Mazda 5 MK 1 - Years 2005-2015
Part: Key

To program the key of the Mazda 5, you need to insert the blank key into the corresponding slot, in order to turn on the ignition. Once this is done, you will need to connect a diagnostic tool to the vehicle's OBD port, located under the steering column. Once the connection is made, you can select the specific model of the car and its corresponding version: then you will need to follow the instructions to program the key. Once the operation is complete, you can disconnect the scanner and verify that the programming was successful.

Posted on 2 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to program a new remote control in the Mazda 5?
How to program a new remote control in the Mazda 5?
Mazda 5 (2005-2015 / MK 1) In this tutorial we can see how to program a new remote control in the Mazda 5, a very simple and quick operation. To do this, we will obviously need…
Can a Mazda 5 remote be programmed after replacing the battery?
Can a Mazda 5 remote be programmed after replacing the battery?
Mazda 5 (2005-2015 / MK 1) To the question of whether it is possible to independently program a remote key for a Mazda 5 car, the answer is yes. The video tutorial here is valu…
How to program the second key for the Mazda 5.
How to program the second key for the Mazda 5.
Mazda 5 (2005-2015 / MK 1) Programming the second key for the Mazda 5 is a simple and quick operation that can be done independently. To carry out this procedure, we need to un…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos