Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. Cx 7
  6. : How do you replace the radiator of the Mazda CX-7?

Mazda Cx 7 - Video tutorial

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Radiator
Operation: How do you replace the radiator of the Mazda CX-7?

In order to replace the radiator of the Mazda CX-7, you need to open the hood so that you can access the front part of the engine compartment: here you will find the radiator, which must first be released from the screws that hold it to the upper supports. After loosening these screws, you will need to disconnect the tubes connected to it and unscrew the bolts that hold it to the lower supports; this will be possible after removing the splash panel positioned in this location. Then, the radiator can be extracted from the upper part of the engine compartment and replaced with a new replacement piece.


Posted on 16 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos