Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain on a Mazda CX-7

Model: Mazda Cx 7 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Timing belt

Video tutorial

This video shows how to replace the timing chain on a Mazda CX-7. It should be replaced approximately every 62,000 miles. First, disconnect the battery cables, remove the radiator cap, open the coolant drain valve, and disconnect the hoses from the radiator.

Next, remove the screws securing the timing chain, take off the water pump heating hoses, then remove the water pump, the crankshaft pulley, and finally extract the timing chain. Proceed with the replacement of the chain and reassemble all the removed components.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How and when to replace the timing chain of the Mazda CX-7 2.3
How and when to replace the timing chain of the Mazda CX-7 2.3
Mazda Cx 7 (2006-2012 / MK 1) In this guide, we will see the main instructions that will allow us to disassemble and replace the timing chain of the Mazda CX-7 2.3; the timing cha…
Guide to Replacing the Timing Chain on the Mazda CX-7
Guide to Replacing the Timing Chain on the Mazda CX-7
Mazda Cx 7 (2006-2012 / MK 1) Today, follow these instructions to remove and replace the timing chain on the Mazda CX-7. To access the timing chain, you will need to remove the en…
Replacement of the Timing Belt
Replacement of the Timing Belt
Mazda Cx 7 (2006-2012 / MK 1) The timing belt is one of the most important components within the engine of our cars. This guide shows how to replace it once you have acquired a ne…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos