Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Radiator

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Radiator

The radiator is one of the most wear-prone parts of the car, being a very fragile component. This guide shows how to proceed with its replacement. A new radiator can be purchased at any auto parts store. First, completely drain the car's cooling system. Locate the radiator outlet hose and detach it from the fitting to allow all the fluid to escape from the system. After this, remove all the rubber hoses connected to the radiator. Once the radiator is removed, you can proceed to take out the thermostat if you haven't done so already.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Chain on a Mazda CX-7
How to Replace the Timing Chain on a Mazda CX-7
Mazda Cx 7 (2006-2012 / MK 1) This video shows how to replace the timing chain on a Mazda CX-7. It should be replaced approximately every 62,000 miles. First, disconnect the batte…
Change the Cabin Air Filter in Your Car
Change the Cabin Air Filter in Your Car
Mazda Cx 7 (2006-2012 / MK 1) Changing the filter in your car is a very important operation as it allows the ventilation system to breathe much better. It is important to replace …
Instructions for Removing the Front Bumper
Instructions for Removing the Front Bumper
Mazda Cx 7 (2006-2012 / MK 1) To remove the front bumper, start by opening the front bonnet and extracting the clips at the ends of the grille. Then move on to the clips that secu…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos