Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Rx 8
    4. : Gear oil

Mazda Rx 8 - Gear oil

Mazda Rx 8 (2003-2012 / MK 1)
Changing the gear oil
The gearbox oil also needs to be replaced periodically, but if problems arise when engaging the gears in the gearbox, it is advisable to replace the gearbox …read all…
Posted on 14 July 2023 by ScegliAuto
Car stereo (1) Spark plugs (2) Differential (1) Brake discs (1) Headlight (1) Tail light (1) Air filter (4) Cabin air filter (3) Clutch (1) Accessory Kit (4) Headlight bulb (2) Interior lights ceiling light bulb (1) Gear oil (1) Engine oil (2) Front bumper (1) Brake pads (1) Radiator (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos