Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Mazda 3

Model: Mazda 3 MK 1, BK - Years 2003-2009
Part: Headlight bulb

Replacing the front headlamp bulb on this car model is quite simple as there is enough space to carry out the operation; start by removing the plastic cover located directly above the headlamp seat, disconnect the bulb's power connector, remove the rubber cover to access the bulb holder, unclip the bulb retaining spring and then remove it from its seat; insert the new bulb (H7 fitting) correctly orienting it in the bulb holder, secure it with the retaining spring, reposition the rubber seal, and reconnect the power connector.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Mazda 3
How to replace the headlight bulb of the Mazda 3
Mazda 3 (2013-2019 / MK 3, BM, BN) Today we will show you how to replace the headlight bulb of the Mazda 3. To replace the bulb, we need to open the front hood of the vehicle and then …
How to replace the headlight bulb of the 2022 Mazda 3.
How to replace the headlight bulb of the 2022 Mazda 3.
Mazda 3 (2019-2026 / BP, MK 4) The steps for replacing the headlight bulb of the 2022 Mazda 3 are as follows: - open the front hood by pressing the lever located under the steering…
How to replace the headlight bulb on Mazda 3
How to replace the headlight bulb on Mazda 3
Mazda 3 (2003-2009 / MK 1, BK) In this new mini guide of ours we are going to explain to you in detail how to replace the bulb in the front light of your Mazda 3 first series (year…

How to Replace the Boot Compartment Light Bulb on a Peugeot 208

If you want to improve visibility inside the boot compartment, it is recommended to replace the original incandescent bulb with a LED type (T10 fitting); once the rear hatch is opened, locate the bulb holder positioned on the side, near the shock absorber dome, where the plastic grille is located. Then, lever the retaining tab to extract the bulb holder, disconnect the power connector, and remove the old bulb to replace it with the LED one; reconnect the power, check the correct operation of the bulb (if not, rotate it 180°), and reposition the bulb holder in its place.

Watch the video!


by ScegliAuto

More videos