Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fog light bulb on a Mazda RX-8?

Model: Mazda Rx 8 MK 1 - Years 2003-2012
Part: Fog lights

It will be possible to replace the fog light bulb of the Mazda RX-8 by lifting the car to remove the wheel on the side corresponding to the bulb that needs to be replaced. Once the wheel is removed, you can loosen the screws that secure the inner wheel arch to access the internal components. This will allow you to locate the inner cover of the headlight in order to completely detach it and identify the bulb inside. The bulb can then be disconnected from the connector, the new one inserted, and everything checked to ensure it works.

Posted on 5 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Headlight and Replacing the Bulb on the Mazda RX-8
Removing the Front Headlight and Replacing the Bulb on the Mazda RX-8
Mazda Rx 8 (2003-2012 / MK 1) In this video, we will discover the steps to remove the front headlight and replace the bulbs on the Mazda RX-8 in simple steps. First, open the bonn…
Front Headlamp Bulb Replacement
Front Headlamp Bulb Replacement
Mazda Rx 8 (2003-2012 / MK 1) To replace the bulbs, it is necessary to completely remove the wheel to access the front light assembly. Unscrew the retaining screws of the cover, t…
Replacement of Rear Headlamp Bulb
Replacement of Rear Headlamp Bulb
Mazda Rx 8 (2003-2012 / MK 1) To replace the rear light bulbs, you need to remove the entire light assembly. The screw is accessible on the side of the boot after removing the pla…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos