Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Mazda MX-5.

Model: Mazda Mx 5 MK 3, NC - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the headlight bulb of the Mazda MX-5. First, we will remove the front wheel arch by taking out the plastic clips to access the back of the headlight; we will unscrew the screws of the optical group to replace the low beam light, disconnecting the bulb's electrical connector, as shown in the video.

We will replace and install the new bulb, ensuring it has the same fitting; then we will reassemble the front headlight and check the operation of all the lights.


Posted on 28 December 2025 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Mazda MX-5
How to Replace the Remote Battery of the Mazda MX-5
Mazda Mx 5 (2015-2024 / MK 4, ND) In today's video, learn how to replace the remote battery of a Mazda MX-5. This video is also suitable for other contemporary Mazda models, as they a…
How to Replace the Remote Control Battery on a Mazda MX-5?
How to Replace the Remote Control Battery on a Mazda MX-5?
Mazda Mx 5 (2015-2024 / MK 4, ND) To replace the remote control battery on a Mazda MX-5, lower the lever located at the back of the remote to slide out the key, pulling it from the bo…
How to Replace the Remote Battery on the Mazda MX-5?
How to Replace the Remote Battery on the Mazda MX-5?
Mazda Mx 5 (2005-2015 / MK 3, NC) In this tutorial, you will see how to replace the remote battery on the Mazda MX-5, a very simple and quick operation. You will need a small flat-hea…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Ceed

This brief and simple guide will show you how to reset the tyre pressure warning light (TPMS) on a Kia Ceed. Before performing the reset, ensure all four tyres are at the correct operating pressure. Get inside the vehicle and turn on the ignition. Locate the reset button on the dashboard, next to the steering wheel, as shown in the video. Press and hold the TPMS reset button until the warning light blinks on the dashboard and then goes out completely!

Watch the video!


by ScegliAuto

More videos