Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on the Opel Karl

Model: Vauxhall Karl MK 1 - Years 2015-2019
Part: Tire pressure warning light

Resetting the TPMS light for tyre pressure on the Opel Karl is a simple process. Start by turning on the instrument cluster, then press the MENU button on the left stalk of the steering wheel. Continue pressing the MENU button until the tyre pressure option appears. Use the arrow buttons on the same stalk to set the pressure values specified by the manufacturer, and finish the reset by pressing the SET button above the stalk. Turn off the instrument cluster.

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light of the Opel Karl
How to reset the service light of the Opel Karl
Vauxhall Karl (2015-2019 / MK 1) To reset the service light on an Opel Karl vehicle, it is essential that all necessary maintenance operations have been carried out in the workshop f…
How to reset the service light on the 2017 Opel Karl
How to reset the service light on the 2017 Opel Karl
Vauxhall Karl (2015-2019 / MK 1) Today we will explain how to reset the service light on an Opel Karl vehicle. To reset the light, we need to turn on the instrument panel and press t…
How to Reset the Service Light on an Opel Karl
How to Reset the Service Light on an Opel Karl
Vauxhall Karl (2015-2019 / MK 1) Here’s how to reset the service light for routine maintenance on an Opel Karl. First, get inside the vehicle and start the ignition; then press the m…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos