Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Use Cruise Control in the Mazda 3?

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part: Checks and maintenance

In this tutorial, you will see how to use the Cruise Control in the Mazda 3, a very simple and quick operation. This system should only be used on fast-moving roads and in the absence of obstructions. First, activate the Cruise Control by pressing the appropriate button on the steering wheel, then reach the desired speed, press the "SET -" button, and release the accelerator. To increase or decrease the speed, simply use the "+" and "-" buttons respectively; to pause the system, you can either brake or press the "CANCEL" button, while to deactivate it completely, you must press the initial button.

Posted on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to activate the cruise control on a Mazda 3?
How to activate the cruise control on a Mazda 3?
Mazda 3 (2019-2026 / MK 4, BP) To activate the cruise control on a Mazda 3, first turn on the instrument cluster by pressing the ignition button and inserting the key. Once the clu…
How do you replace the battery of the Mazda 3 remote control?
How do you replace the battery of the Mazda 3 remote control?
Mazda 3 (2013-2019 / MK 3, BN, BM) The procedure for replacing the battery of the Mazda 3 remote control is done by removing the key located inside the device: once the key has been re…
How to open the remote control of the Mazda 3?
How to open the remote control of the Mazda 3?
Mazda 3 (2013-2019 / MK 3, BN, BM) In this tutorial, we can see how to open the remote control of the Mazda 3, an extremely simple and quick operation to be carried out, for example, i…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos