Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on Mazda 626

Model: Mazda Mazda Various
Part: Headlight bulb

In this video, you will replace the front headlamp bulb on the Mazda 626. First, open the bonnet and locate the plastic cover for the headlamp bulbs: simply pull it off from the tab and disconnect the connector. Now, just release the clip to extract the bulb! Remember that the bulb is a halogen type with an H7 fitting: only use high-quality bulbs (preferably warm light). Proceed with reassembly and any replacement on the other side.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Headlight Bulb on the Mazda E2000?
How to Change the Front Headlight Bulb on the Mazda E2000?
Mazda Mazda Various To replace the front headlight bulb on the Mazda E2000, it is advisable to use a power screwdriver. You can also use a standard screwdriver and some …
How to replace the headlights of the Mazda B-Series Truck
How to replace the headlights of the Mazda B-Series Truck
Mazda Mazda Various In this guide, we will see the main instructions on how to remove and replace the headlights of the Mazda B-Series Truck. First, move to the front of…
How to Replace the Front Suspension on a Mazda Bongo
How to Replace the Front Suspension on a Mazda Bongo
Mazda Mazda Various This brief guide provides the main instructions on how to remove and replace the front suspension on a Mazda Bongo. First, lift the vehicle and begin…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos