Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : Rear light bulb replacement

Mazda 3 - Video tutorial

Model: Mazda 3 MK 1, BK - Years 2003-2009
Part: Rear light bulb
Operation: Rear light bulb replacement

To replace the rear light bulbs it is necessary to disassemble the entire light assembly. The screw is accessible on the side of the luggage compartment after removing the plastic cap by levering with a plastic tool in the special slot. Unscrew the screws holding the headlight located under the cover and remove the headlight by removing the connectors. After removing the bulb holder, carefully replace the defective bulb by pressing it lightly and turning it anticlockwise until it releases. Put the new bulb back using one with the same characteristics. Reposition the light unit in its housing by connecting the relative connector. Carefully tighten the fixing screw and close the plastic cap. Carry out a function test.


Posted on 14 July 2023 by ScegliAuto



Replacement of the rear lights bulbs of the Mazda 3.
Mazda 3 (2013-2019 / BN, BM, MK 3) In this video, we see what to do if one of the rear light bulbs were to burn out; we see how to proceed with the replacement. We open the trunk door,
Rear light bulb replacement
Mazda 3 (2003-2009 / MK 1, BK) To replace the rear light bulb it is necessary to remove the entire light assembly. The screws are accessible one at the bottom under the boot cover
License plate light bulb replacement
Mazda 3 (2003-2009 / MK 1, BK) In order to replace the rear license plate light bulb, the bulb holder must be removed: this is attached to the bumper by means of two plastic tabs;

Other guides that may interest you

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos