Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of a Mazda 3?

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Tail light bulb

To replace the rear headlight bulb of a Mazda 3, start by turning off the engine and opening the trunk. Locate the access panel on the inside of the trunk compartment, behind the rear headlight. Remove this panel to access the bulb socket. Carefully remove the bulb socket from the headlight assembly by rotating it counterclockwise. Extract the burnt-out bulb by gently pulling it out of the socket. Take note of the orientation of the bulb to correctly insert the new one. Insert the new bulb into the socket, making sure it is securely in place. Reinsert the socket into the headlight assembly and rotate it clockwise to lock it in position. Replace the access panel, ensuring it is securely in place. Close the trunk and start the engine to verify that the new bulb is functioning correctly.

Posted on 13 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Mazda 3
How to replace the headlight bulb of the Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) Today we will show you how to replace the headlight bulb of the Mazda 3. To replace the bulb, we need to open the front hood of the vehicle and then …
How to Replace the Rear Headlight Bulbs on a Mazda 3
How to Replace the Rear Headlight Bulbs on a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Are the rear headlight bulbs blown? Here's how to change them. Open the boot and secure it. Remove the fabric panel covering the headlight (located a…
How to replace the headlight bulb of the 2022 Mazda 3.
How to replace the headlight bulb of the 2022 Mazda 3.
Mazda 3 (2019-2026 / MK 4, BP) The steps for replacing the headlight bulb of the 2022 Mazda 3 are as follows: - open the front hood by pressing the lever located under the steering…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos