Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Pump on Mazda CX-7

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Fuel pump

For this car model, the tutorial begins with the intercooler removed from the vehicle and set aside (to remove it, simply unscrew the three nuts and disconnect the two pipes). This gives you access to the fuel pump: disconnect the two inlet and outlet pipes by prying with a flat screwdriver as shown in the video. At this point, also disconnect the two connectors by pressing on them and pulling. Once all pipes and wiring are disconnected, unscrew the fixing bolts and finally, remove the pump. Proceed in reverse for reassembly. This maintenance is suitable for reasonably experienced individuals.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Chain on a Mazda CX-7
How to Replace the Timing Chain on a Mazda CX-7
Mazda Cx 7 (2006-2012 / MK 1) This video shows how to replace the timing chain on a Mazda CX-7. It should be replaced approximately every 62,000 miles. First, disconnect the batte…
Fuse Replacement for Pump Protection
Fuse Replacement for Pump Protection
Mazda Cx 7 (2006-2012 / MK 1) In some technical issues, the solution is simpler than expected; in this case, we will check the pump fuse. Look for a diagram online that indicates …
How to replace the key shell of the Mazda CX-7
How to replace the key shell of the Mazda CX-7
Mazda Cx 7 (2006-2012 / MK 1) In this video tutorial, we will see the main steps that will allow us to disassemble and replace the shell of the remote control key for the Mazda CX…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos