Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Mazda CX-9

Model: Mazda Cx 9 TB - Years 2007-2015
Part: Fuel pump

In this brief guide, follow the instructions to remove and replace the fuel pump on a Mazda CX-9. First, open the left rear door of the vehicle and move the seat forward to access the fuel pump located on the floor by removing the cover. Then, disconnect the fuel lines from the pump and the electrical connector from the float, and unscrew the plastic ring to remove it, as shown in the video. At this point, perform the repair or replacement of the fuel pump!

Posted on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Pump from a Mazda CX-9
How to Remove the Fuel Pump from a Mazda CX-9
Mazda Cx 9 (2007-2015 / TB) This guide shows how to replace the fuel pump in the Mazda CX-9. After removing the left rear seat using the four securing bolts, you can access the …
How to Replace the Front Brake Pads on a Mazda CX-9?
How to Replace the Front Brake Pads on a Mazda CX-9?
Mazda Cx 9 (2007-2015 / TB) To replace the front brake pads on a Mazda CX-9, lift the vehicle so you can remove the bolts securing the wheel corresponding to the pads being repl…
How to Replace the Spark Plugs on the Mazda CX-9?
How to Replace the Spark Plugs on the Mazda CX-9?
Mazda Cx 9 (2007-2015 / TB) To replace the spark plugs on the Mazda CX-9, open the hood to remove the plastic cover from the top of the engine block. Under this cover, you will …

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos