Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump from a Mazda CX-9

Model: Mazda Cx 9 TB - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuel pump

See other generations:
Video tutorial

This guide shows how to replace the fuel pump in the Mazda CX-9. After removing the left rear seat using the four securing bolts, you can access the fuel pump inspection area. Remove the carpet from the bottom of the vehicle to expose the pump cover.

Remove the four securing screws and take off the cover. At this point, disconnect the control electrical connector and the fuel supply line.

Prepare a container to collect any remaining fuel in the line. Unscrew the pump body securing screws and pull it out while allowing the fuel to drain.

Install the new unit and reassemble everything in position.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the 2010 Mazda CX-9
How to Reset the Oil Light on the 2010 Mazda CX-9
Mazda Cx 9 (2007-2015 / TB) If the oil warning light continues to illuminate on the instrument cluster of your first-generation Mazda CX-9 (2010) despite a recent oil change, yo…
How to Replace the Cabin Air Filter in a 2011 Mazda CX-9
How to Replace the Cabin Air Filter in a 2011 Mazda CX-9
Mazda Cx 9 (2007-2015 / TB) With this guide, you will finally complete the replacement of the cabin air filter in your first-generation 2011 Mazda CX-9 correctly. First, turn of…
How to reset the tire pressure light on the 2017 Mazda CX9
How to reset the tire pressure light on the 2017 Mazda CX9
Mazda Cx 9 (2016-2024 / TC) In this new guide, we will explain step by step how you can manually reset the tire pressure warning light on the instrument panel display of your 20…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos