Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing Spark Plugs

Model: Mazda 5 MK 1 - Years 2005-2015
Part: Spark plugs

Before proceeding with the removal of the spark plugs, it is advisable to remove the plastic cover and blow compressed air near the spark plug seats to eliminate any dirt that may enter the cylinders during disassembly. Disconnect the connectors from the coils, unscrew the respective fixing screws, and remove them from their seats; then proceed to remove the spark plugs and install the new ones (do not exceed the tightening torque). Finally, reposition the coils, tighten the fixing screws, and reconnect the connectors, ensuring they correspond to the respective cylinder.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the glow plugs of the Mazda 5 2.0
How to replace the glow plugs of the Mazda 5 2.0
Mazda 5 (2005-2015 / MK 1) In this guide we will see the main instructions on how to disassemble and replace the glow plugs of the engine of the Mazda 5 2.0. First of all, we o…
Guide to replacing the automatic transmission of the Mazda 5
Guide to replacing the automatic transmission of the Mazda 5
Mazda 5 (2005-2015 / MK 1) In this guide, we will see the instructions that will allow us to disassemble and replace the entire automatic transmission box of the Mazda 5. The p…
Guide to disassembling the front door panel of the Mazda 5
Guide to disassembling the front door panel of the Mazda 5
Mazda 5 (2005-2015 / MK 1) The instructions in this guide will show us how to disassemble and replace the front door panel of the Mazda 5. First, we open the front door of the …

Other guides you may be interested in

How to Remove the Steering Wheel Airbag on a Dodge Journey

How to remove the steering wheel airbag on a Dodge Journey? Follow these steps. Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Remove the inspection caps from the back of the steering wheel, then unscrew the airbag retaining bolts with a socket wrench. Once the driver’s airbag is released, disconnect the power connectors and remove the airbag from the steering wheel. For reinstallation: connect the power connectors, then press the airbag back onto the steering wheel while simultaneously tightening the rear bolts.

Watch the video!


by ScegliAuto

More videos