Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the glow plugs of the Mazda 5 2.0

Model: Mazda 5 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Glow plugs

Video tutorial

In this guide we will see the main instructions on how to disassemble and replace the glow plugs of the engine of the Mazda 5 2.0. First of all, we open the hood of the car and start by disconnecting the battery; then we disconnect the connectors of the glow plugs located on the top, using a socket wrench with extension to unscrew and remove the four glow plugs, as shown in the video.

At this point we install the new original glow plugs, screwing them in by hand and then gently tightening with the wrench, following the video tutorial until the end!


Posted on 20 November 2025 by ScegliAuto


Related tutorials

How to Remove the Radio from a Mazda 5
How to Remove the Radio from a Mazda 5
Mazda 5 (2005-2015 / MK 1) Before you can start, sit in the driver's seat of your Mazda 5. Begin by unscrewing and removing the gear knob, then unclip and remove all the covers…
How to replace the dipped beam headlight bulbs in the Mazda 5?
How to replace the dipped beam headlight bulbs in the Mazda 5?
Mazda 5 (2005-2015 / MK 1) In this tutorial, see how to replace the dipped beam headlight bulbs in the Mazda 5, a very simple and quick operation. First, ensure the key is not …
Removing the Front Headlight Bulb of the Mazda 5
Removing the Front Headlight Bulb of the Mazda 5
Mazda 5 (2005-2015 / MK 1) In this brief and simple video, you will learn how to remove and replace the front headlight bulb of the first series Mazda 5, following the instruct…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos