Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the low beam headlights bulbs in the Mazda 5?

Model: Mazda 5 MK 1 - Years 2005-2015
Part: Headlight bulb

In this tutorial we can see how to replace the low beam headlight bulbs in the Mazda 5, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can operate safely, then open the hood, locate the cap located on the back of the headlight in question and remove it. Next, disconnect the power connector, release the metal clip indicated by pressing it inward and remove the old bulb from the housing. At this point, all that remains is to insert the replacement and reassemble everything following the reverse procedure.

Posted on 1 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Light Bulbs on a Mazda 5
Replacing the Rear Light Bulbs on a Mazda 5
Mazda 5 (2005-2015 / MK 1) Let’s briefly go through the steps to remove and replace the rear light bulbs on a Mazda 5. First, open the tailgate and start unscrewing the side sc…
Where Are the Fuses on a Mazda 5?
Where Are the Fuses on a Mazda 5?
Mazda 5 (2005-2015 / MK 1) On the Mazda 5, all fuses are contained within specific fuse boxes installed in the vehicle: this type of car has two fuse boxes. The first is locate…
Where are the fuses located in the Mazda 5?
Where are the fuses located in the Mazda 5?
Mazda 5 (2005-2015 / MK 1) The fuses of the Mazda 5 are located inside the appropriate fuse boxes that are installed in the vehicle: in this type of car, you will find two boxe…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos