Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulbs on a Mazda 5

Model: Mazda 5 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light bulb

Video tutorial

Let’s briefly go through the steps to remove and replace the rear light bulbs on a Mazda 5. First, open the tailgate and start unscrewing the side screws of the rear light, disconnecting the electrical connector for the bulbs to remove it; then, separate the bulb holder from the cover to access the bulbs, as illustrated in the video.

At this point, replace any faulty stop bulbs with new ones of the same fitting; reassemble the rear light and check the operation of the bulbs.


Posted on 19 April 2026 by ScegliAuto


Related tutorials

Replacement of Rear Shock Absorbers
Replacement of Rear Shock Absorbers
Mazda 5 (2005-2015 / MK 1) Loosen the fastening pins of the rear wheel before lifting it and placing it on suitable axle stands; complete the wheel removal to access the flange…
Where are the Fuses Located in a Mazda 5?
Where are the Fuses Located in a Mazda 5?
Mazda 5 (2005-2015 / MK 1) Any fuse in the Mazda 5 is contained within one of the designated fuse boxes present in the vehicle: in this type of car, you can find two boxes that…
Replacing the Timing Belt on a Mazda 2
Replacing the Timing Belt on a Mazda 2
Mazda 5 (2005-2015 / MK 1) This guide will illustrate the main steps for removing and replacing the timing belt on a Mazda 2. First, open the bonnet of the vehicle and begin by…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos