Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on the Mazda 5

Model: Mazda 5 MK 1 - Years 2005-2015
Part: Battery

Want to DIY and replace the battery in your vehicle? The instructions and procedure for a correct and safe replacement are outlined below. First, purchase a new battery that matches the specifications and amperage recommended by the manufacturer. Once you open the bonnet, locate the battery on the left side and first unscrew the fixing screws of the upper plate. Then, disconnect the negative terminal followed by the positive terminal. Extract the battery from the compartment and replace it with the new one, reconnecting the positive terminal first and then the negative terminal, and finally refit the fixing screws of the upper plate.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Mazda 5 remote control?
How to replace the battery of the Mazda 5 remote control?
Mazda 5 (2005-2015 / MK 1) In this tutorial, we can see how to replace the battery of the Mazda 5 remote, an extremely simple and quick operation. To do this, we will need a sm…
How to Replace the Remote Battery of the Mazda 5
How to Replace the Remote Battery of the Mazda 5
Mazda 5 (2005-2015 / MK 1) If the remote for your Mazda 5 has suddenly stopped working and you want to learn how to replace the battery located inside, you are in the right pla…
How to Replace the Key Battery in the Mazda 5
How to Replace the Key Battery in the Mazda 5
Mazda 5 (2005-2015 / MK 1) To independently replace the button battery inside your Mazda 5 key (2005-2015), carefully read the following guide and follow the steps described. F…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos