Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs in a Mazda Bongo?

Model: Mazda Bongo Brawny - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will see how to replace the headlight bulbs in a Mazda Bongo, a very simple and quick operation. Before proceeding, ensure the key is not in the ignition for safety.

Start by opening the hood, then move to the back of the headlight and disconnect the power connector. Next, remove the rubber outer cover and unlock the metal clip to extract the bulb.

Finally, insert the replacement bulb, avoiding direct contact with the glass, as any residue can cause overheating.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight and Bulbs on the Mazda Bongo
How to Replace the Headlight and Bulbs on the Mazda Bongo
Mazda Bongo Brawny (1995-2005 / ) Today's guide will show you the main steps to remove and replace the headlight and its bulbs on the Mazda Bongo. First, open the hood and start by re…
How to Replace the Tail Light Bulb on a Mazda Bongo?
How to Replace the Tail Light Bulb on a Mazda Bongo?
Mazda Bongo Brawny (1995-2005 / ) To replace the tail light bulb on a Mazda Bongo, open the rear hatch to access the screws on the side of the light. Loosen these screws to pull the l…
How to Replace the Timing Belt on a Mazda Bongo
How to Replace the Timing Belt on a Mazda Bongo
Mazda Bongo Brawny (2019-2026 / MK 5) To replace the timing belt on a Mazda Bongo, open the hood to access the left side of the engine block. Here, you will find the belt routed around th…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos